Specifications

Prices and specifications are subject to change without notification.
40
Never Let Go!
PROFESSIONAL STANDS AND GRIP EQUIPMENT
KUPOGRIP.COM
− Leveling leg that enables the user to extend
one leg more than the others to level out
the stand on an incline or uneven terrain.
− Velcro strap is supplied to fasten around
the legs when collapsed to prevent them
from opening for easier storage and
transportation.
− Skid-proof foot-step located at the base of
the stand to allow the user to stand upon it
to reach the top head to make adjustments
if necessary.
− Casters (KS940822) are optional for easy
repositioning of the stand. The rugged feet
of the stand are cast out of zinc for more
strength anddurability.
3-Section Wind-Up Stand
with Auto Self-Locking Device
KS401212
$560.50
Kupo 3-Section Wind-Up Stand
with Auto Self-Locking Device
Wind-up stands have been the definition
of strength and safety in the grip industry
since their inception. They enable a single
operator to raise and lower heavy loads safely
with just the turn of a handle. As you crank
the handle, both risers move simultaneously.
A single clockwise revolution of the handle
raises the stand 1.73" (4.4cm), and a single
counter-clockwise revolution will lower the
stand by the same amount. The KS401212
has an automatic self-locking mechanism
that prevents the light stand from dropping
unexpectedly making the operation safer. The
risers have a series of perforations that are
engaged by a safety pin. With the auto-lock
engaged, the safety pin automatically locks
into each successive perforation as you raise
the stand. Once the auto-lock is disengaged,
an internal spring retracts the safety pin
allowing you to lower the stand.
FEATURES
− Triple function universal combo head
with both 1-1/8" (28mm) and 5/8" (16mm)
receivers plus a multi-direction 5/8" (16mm)
stud is affixed to the light stand by a steel
bolt through the top tube that creates an
incredibly solid assembly.
− User adjustable tension of the break shoe
against the risers. The tension can simply be
adjusted with an Allen wrench.
−Crank handle folds back for travel. It also
is designed as a safety measure and can
be folded back and placed between two
of the tripod’s legs. The reason for this
is to catch the handle and prevent it
from turning, stopping the risers
from quickly falling if the lock is
unexpectedly disengaged.
Leveling Leg can easily be
extended to adjust for an
incline or uneven terrain.
Automatic self-locking
mechanism prevents the
light stand from dropping
unexpectedly.
Crank handle folds back as
an added safety measure
to prevent it
from turning.
Skid-proof foot-step to
allow the user to reach
the top head to make
adjustments if necessary.
Products shown are a sampling of
what is available. For complete listing
and additional information, please
visit our website.