User guide

72
Operation When Wi-Fi Is Connected
Connecting with Wi-Fi Direct Device to
Exchange Data
In Wi-Fi setting window, Wi-Fi Direct Tap a
device Invitation is accepted on the device
・Setting is available when Wi-Fi is ON.
Enable/Disable Network Notification
In Wi-Fi setting window, Advanced
Network notification
・Setting is available when Wi-Fi is ON.
・
Tap Network notification to enable ( )/disable ( )
setting.
Setting Wi-Fi Connection When Display Turns
Off
In Wi-Fi setting window, Advanced Wi-Fi
sleep policy Tap an item
Enable/Disable Wi-Fi Non-Connection for
Unstable Connection
In Wi-Fi setting window, Advanced Avoid
poor connections
・
Tap Avoid poor connections to enable ( )/disable
( ) setting.
Specifying Frequency Band
In Wi-Fi setting window, Advanced Wi-Fi
frequency band Tap an item
Saving Battery When Wi-Fi Is ON
In Wi-Fi setting window, Advanced Wi-Fi
optimization
・
Tap Wi-Fi optimization to enable ( )/disable ( )
setting.
・This function saves Battery, however, Wi-Fi connection
trouble may occur. In such case, check reception of access
points in Wi-Fi settings and try to connect.
Checking MAC Address
In Wi-Fi setting window, Advanced
・MAC address is shown below MAC address.
Checking IP Address
In Wi-Fi setting window, Advanced
・IP address is shown below IP address.
Enabling/Disabling Auto-IP Setting
In Wi-Fi setting window, Advanced auto-IP
setting
・
Tap auto-IP setting to enable ( )/disable ( )
setting.
・Setting is available when Wi-Fi is OFF.
・When auto-IP setting is enabled and if correct IP address
is not assigned, fixed IP address is given. In this case,
Internet connection is not available and message that
connection is limited is shown.