User guide

61
TV
SoftBank 301F
Watching Television
In Home Screen, (TV)
TV window appears.
・If confirmation appears, follow onscreen instructions.
(Channel) in Control Bar
Channel list appears in information area.
Tap a channel
Selected channel window appears.
・Alternatively, Swipe/Flick service area left/right to switch
channel.
Troubleshooting
Q. Cannot activate TV
A. Battery may be low. Charge Battery.
Q. Cannot watch TV
A. Insert TV Antenna Cable securely and check reception.
If reception is poor, move to a place with good
reception. If inside of a building, moving near windows
may improve reception. Changing orientation of TV
Antenna Cable or holding it away from body may
improve reception.
Important Notes on TV
About Full Seg
Use Full Seg while charging Battery or with Battery fully
charged.
Full Seg may not be received while moving, out of service
area, etc. When "自動切替" is set by View controller, it is
switched to One Seg automatically in such cases.
Do Not Use TV under Following Conditions
Do not use TV while riding a bicycle or motorcycle, or
driving a car. Pay attention to the surrounding traffic
when walking.
Using Abroad
TV is not available due to different broadcast frequencies
and formats abroad.
Channel Setting
Channel setting using area selection may not be available
when the broadcasting frequency is changed or in some
areas. In this case, set channels again.
Watching TV for a Long Time
Watching TV at a loud volume may affect hearing. Handset
may also become warm and cause low-temperature burns by
skin contact.
Auto Ending TV
TV ends automatically when battery level is less than 2%.
Using TV When Handset Is Hot
If TV is watched when handset is hot, alert may appear and
TV may end.
Playable Recorded Data
If recording time is extremely short, data may not be
playable.
Recording Programs
Depending on broadcasting stations, different programs
may be broadcasted in Full Seg and One Seg. Even if
Full Seg program is watched, One Seg program might be
recorded.