User guide

Charging Battery

Battery is built into handset and not removable.

Desktop Holder

Use Desktop Holder and AC Charger FMCAE1.

Insert Power Cable connector into AC Charger port

Insert AC Charger plug into Desktop Holder charging port

Plug AC Charger power plug into AC outlet

Place handset in Desktop Holder

Notification Lamp illuminates while charging.

・Insert handset and press it in the direction of Locks (○)

until Locks click, then confirm that handset is securely

locked.

・Notification Lamp goes out when Battery is full. Remove

handset from Desktop Holder. Unplug AC Charger power plug

from AC outlet.

・When charging starts from Home Screen or Launcher page,

Theater mode starts.

・For charging covered handset, remove attachment before

inserting handset.

Handset Use while Charging

Charging time may be longer or charging may not be

completed.

Internal Battery

Bulges

Depending on usage, bulges may appear near end of battery

life; this does not affect safety.

Replacing Battery

Internal Battery is a consumable item; may need to be

replaced if operating time shortens noticeably. Internal

Battery is not user replaceable; its replacement incurs fees

and requires handset submission to a SoftBank Shop, etc.

For details, contact a SoftBank Shop or SoftBank Customer

Support, General Information.

To check Battery performance, in Home Screen,

Settings About phone Status Battery

performance .

Handling Desktop Holder

Note the following when handling Desktop Holder.

・Do not get strap etc. caught between handset and

Desktop Holder.

・Do not cover Hole (Sound Hole) of Desktop Holder, or let

dust adhere on it.

・Always use included AC Charger FMCAE1 to Desktop

Holder.

・Some covers are not compatible with Desktop Holder.