Instruction manual

FS 240, FS 240 R
English
41
Maintenance and Care
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
before starting work after finishing work or daily after each refueling stop weekly monthly every 12 months if problem if damaged if required
Complete machine
Visual inspection (condition, leaks) XX
Clean X
Replace any damaged parts X
Control handle Check operation XX
Air filter, paper filter
Visual inspection XX
Replace
1)
X
Air filter, synthetic fabric filter
Visual inspection XX
Clean X
Replace XX
Fuel tank Clean X
Pickup body in fuel tank
Check
2)
X
Replace
2)
XXX
Carburetor
Check idle adjustment – the cutting
attachment must not turn
XX
Readjust idle speed X
Spark plug
Readjust electrode gap X
Replace after every 100 operating hours
Cooling inlets
Visual inspection X
Clean X
Cylinder fins Clean
2)
X
Spark arrestor in muffler
Check
2)
X
Clean or replace
2)
X
Spacer
Check X
Replace
2)
XX