Instruction manual

FS 240, FS 240 R
English
28
The type and style of the harness
depend on the market.
The use of the shoulder strap is
described in the chapter on "Approved
Combinations of Cutting Attachment,
Deflector, Handle and Harness".
Shoulder strap
N Put on the shoulder strap (1).
N Adjust the length of the strap so that
the carabiner (2) is about a hand’s
width below your right hip.
N Balance the brushcutter.
Full harness
Fitting the full harness is described in
detail in the instruction sheet supplied.
N Put on the full harness (1).
N Adjust the length of the strap so that
the carabiner (2) is about a hand’s
width below your right hip.
N Balance the brushcutter.
The type and style of the harness and
carabiner (spring hook) depend on the
market.
Attaching the unit to the harness
N Attach the carabiner (1) to the
carrying ring (2) on the drive tube.
Floating positions
N Mowing heads, grass cutting blades
and brush knives should just touch
the ground.
Fitting the Harness
1
002BA374 KN
2
002BA386 KN
1
2
Balancing the
Trimmer/Brushcutter
1
2
1
2
002BA387 KN
002BA388 KN