Instruction manual

FS 240, FS 240 R
English
21
Mounting the Barrier Bar
N Fit the washer (1), inside diameter
5.3 mm (0.21 in), on the M5x23
screw (2).
N Hold the barrier bar (3) against the
loop handle and insert the screw
with washer.
N Tighten down the screw (2) firmly.
Leave the barrier bar permanently
mounted to the loop handle.
Adjusting and Securing the Loop Handle
The loop handle can be adjusted to suit
the height and reach of the operator and
the application by changing
distance (A).
Recommendation: distance (A):
about 35 cm (14 in)
N Loosen the screw on the handle.
N Slide the handle to the required
position.
N Tighten down the screw so that the
handle cannot be rotated on the
drive tube.
Correct adjustment of the throttle cable
is a preconditon for correct operation of
the machine in all modes, from starting
to full throttle.
It may be necessary to readjust the
throttle cable after assembling the
machine or after a prolonged period of
operation.
– The throttle cable can checked and
adjusted by the user: see
"Inspection and Maintenance by
User".
– The throttle cable can be checked
and adjusted by your dealer. Have
the machine repaired by your
servicing dealer. STIHL
recommends a STIHL servicing
dealer.
1
2
3
9926BA003 KN
5,3 mm
A
9926BA004 KN
Adjusting the Throttle Cable