Technical data

13773-001
34-50
Page 330 Nov 2000
D. VOR/LOC Antenna (See Figure 34-502)
(1) Removal - VOR/LOC Antenna
(a) Remove screws securing antenna mounting-plate to vertical stabilizer.
(b) Lift antenna mounting-plate assembly from vertical stabilizer recess.
(c) Disconnect antenna cable from antenna.
(d) Remove screws securing antenna to mounting plate and remove antenna from airplane.
(2) Installation - VOR/LOC Antenna
(a) Acquire necessary tools, equipment, and supplies.
(b) Remove old sealant and solvent clean antenna mounting surfaces. (Refer to 20-30)
(c) Install screws securing antenna to antenna mounting-plate.
(d) Connect antenna cable to antenna.
(e) Install antenna mounting-plate assembly into vertical stabilizer recess.
(f) Install screws securing antenna mounting-plate to vertical stabilizer.
(g) Apply sealant around perimeter of antenna mounting-plate.
Description P/N or Spec. Supplier Purpose
Adhesive/Sealant C850A 151-
8275
Sherwin Williams Weather Sealant