Technical data

13773-001
32-41
Page 330 Nov 2000
(c) Inspect bearing cups for looseness, scratches, pitting, corrosion, or evidence of overheat-
ing. Replace cup if any defect exists.
(d) Inspect snap rings and grease seals for distortion or wear. Replace grease seal felts if
contaminated or hard.
(e) Carefully inspect through bolts. Check for cracks by magnetic particle inspection, espe-
cially in radius under head and in threads adjacent to bolt shank. Replace any doubtful
bolt.
(f) Inspect self locking nuts for damage. Replace nut if doubtful.
(g) Reassemble wheel. (Refer to 32-42)