Technical data

13773-001
5-30
Page 4
18. Brakes
Rudder pedal brakes should hold airplane stationary with no
slipping at full power. Parking brake should hold airplane station-
ary with no slipping at full power.
19. Oil and Cylinder Head Temperatures
Verify temperatures indicate in the green arc.
20. Fuel Flow
Advance throttle to full forward. Verify fuel flow indicates approx-
imately 28 gal/hr.
21. Engine Idle
Move throttle control lever to full aft. Tachometer should read
between 600 and 750 RPM with the mixture full rich
22. Magneto Grounding
Set engine speed to 1000 RPM. Engine should cease to fire
when magneto momentarily switched to OFF position.
23. Engine Cut Out and Shut Down
Move mixture control lever slowly toward idle cutoff. Engine
RPM should increase by 25 to 50 RPM before engine begins to
cut out. Move mixture control lever full aft to shut down engine.
Operational Inspection Report (Continued) Chk’d Notes
30 Nov 2000