Technical data

13773-001
5-20
Page 12
2. Tires
Visual Inspection for cuts, uneven or excessive wear, and slippage.
5-20 ❍
3. Tires
Inspect for proper tire pressure.
12-10 ❍
4. Brake System
Check system for proper operation.
5-20 ❍
5. Brake System
Perform Inspection/Check for disk and lining wear, condition, and
evidence of distress.
32-42 ❍
6. Flexible Brake Lines
Visual Inspection for leaks, security, and condition.
5-20 ❍
7. Wheels
Remove, Visual Inspection for condition, repack bearings.
32-41 ❍
8. Wheels
Visual Inspection for cracks, corrosion, and broken bolts.
32-41 Annual
9. Polymer Shock Absorbing Pucks, Puck Tray, and Attach Bolts
Visual Inspection of pucks for cracking or splitting. Ensure attach
bolts are perpendicular to puck tray and puck stack-up is in align-
ment.
5-20 ❍
10. Nose Gear Fork and Spindle
Visual Inspection for condition.
5-20 ❍
11. Nose Gear Strut, Attachment, Bushings, and Bolts
Visual Inspection for cracking, condition, and security.
32-20 ❍
12. Nose Gear Bolt Shaft and Spindle
Lubricate.
12-20 ❍
13. Nose Gear Fork and Spindle
Inspect fork assembly for proper nut torque and cotter pin.
20-60 ❍
14. Main Gear Assembly
Visual Inspection for condition.
5-20 ❍
Landing Gear Group (Continued)
Chap-Sect
Reference
Interval
100 Special
Initials
31 July 2001