Technical data

13773-001
24-30
Page 530 Nov 2000
2. MAINTENANCE PRACTICES
A. Alternator 1 (Forward Alternator)
(1) Removal
(a) Verify ignition switch is in the off position and remove the key. (Refer to POH)
(b) Ensure BAT 1, BAT 2 and AVIONICS master switches are in the off position.
(c) Remove engine cowling. (Refer to 71-10)
(d) Disconnect battery and insulate battery terminals to prevent accidental connection. (Refer
to 24-30)
(e) Identify each wire from the alternator terminals and disconnect.
(f) Remove alternator mounting nuts, washers, lockwashers, and remove the alternator.
(2) Installation
(a) Place alternator and a new gasket into position and secure it using the existing washers,
lockwashers, and nuts.
(b) Connect the alternator wires to the appropriate terminal.
(c) Connect battery.(Refer to 24-30)
(d) Install engine cowling. (Refer to 71-10)