Service manual

__________________________________________________________________________Appendix A
A-9
ECGs are retrieved by ID number. Enter the desired ID and select F1. E-Scribe transmits the most recent ECG with
the specified ID number (or the configured number of ECGs retrieved– refer to Section 3). The ELI 250 prints the
retrieved ECG(s) and returns to the Real-Time ECG View. Viewing and storing retrieved ECGs is not possible.
Requests Download
The ELI 250 can download and process a patient request list from the E-Scribe, which identifies the ECGs (or ECG
orders) needed for particular patients. Request Codes are designed in your E-Scribe Data Management System,
which contain the particular patients who require ECGs. The technician at the cardiograph selects the desired
Request Code (e.g. a code specific to a department or floor) and does not have to enter the demographic information
for the patients belonging to the Request Code. Once downloaded, the patient list for each Request Code is stored in
the cardiograph as the Request List (similar to the patient directory). As with the other forms of ECG data
transmission, you can use either the optional modem or a direct connection. Follow the hookup instructions under
Transmitting Records in this section.
NOTE: A Custom ID must be downloaded before downloading the Requests (please reference the E-Scribe
Operator Manual and Custom ID Format of this Section).
From the Real Time ECG View, select F6 (More) to display the Application Menu.
Real Time ECG View Application Menu
From the Application Menu, select number 6 (Requests Download) and the following screen is displayed: