Service manual

__________________________________________________________________________Appendix A
A-5
Canada 20 Netherlands 7B
Czech Republic 2E New Zealand 7E
China 26 Norway 82
Denmark 31 Poland 8A
Finland 3C Portugal 8B
France 3D Russia B8
Germany 04 South Africa 9F
Greece 46 Singapore 9C
Guam 48 Slovak Republic FC
Hungary 51 Spain A0
Hong Kong 50 Sweden A5
Iceland 52 Switzerland A6
India 53 Taiwan FE
Indonesia 54 Thailand A9
Ireland 57 United Kingdom B4
Israel 58 United States B5
Italy 59 Venezuela BB
Blind Dialing for Xircom Modems
Using the ATX3 command may support specific countries where the “wait for dial tone” often causes
dialing/telephone issues. Following the steps outlined above, access the Configure Modem Screen. Using the
keypad, enter ATX3. Select F1 (Send). The following status messages will be displayed:
“Sending…”
“Command Stored”
“Reading Status, please wait…..”
The country code string will be displayed.
Press F6 (Exit)
MulitTech MODEM COUNTRY CODE LIST:
Country Code Country Code
Argentina 07 Italy FD
Australia 09 Japan 00
Austria FD Korea B5
Belgium FD Liechtenstein FD
Canada B5 Luxembourg FD
China B5 Mexico B5
Cyprus FD Netherlands FD
Czech Republic FD New Zealand 7E
Denmark FD Norway FD
Finland FD Philippines B5
France FD Portugal FD
Germany FD Slovak Republic FD
Greece FD Spain FD
Hong Kong 99 Sweden FD
Hungary FD Switzerland FD
Iceland FD Taiwan FE
Indonesia 99 United Kingdom FD
Ireland FD United States B5
WLAN Transmission
For a WLAN transmission, set the Default XMT media to WLAN from Configuration page 6 (see section 3 of this
manual). It is necessary that the IT Manager of your facility configure the wireless access point(s) and E-Scribe