Service manual

ELI 250/210__________________________________________________________________________
A-4
From the Application Menu, simultaneously press ALT+SHIFT+M to access the modem initialization string. The
following screens appear:
Approximately 30 second delay
From the Configure Modem screen, select F2 (+GCI=) to populate the prefix “AT+GCI” of the modem command.
TIP: “AT+GCI” will be highlighted – cursor is not present – use keypad to enter country code.
The type of modem installed in your cardiograph is displayed at the bottom of the Configure Modem screen.
Depending upon the type of modem, use the corresponding list below to enter your country code. Select F1 (Send)
to change your country code. “Sending….” and “Command stored” will be displayed. Select F6 (Exit) to return to
the Application Menu.
XIRCOM MODEM COUNTRY CODE LIST:
Country Code Country Code
Argentina 07 Liechtenstein 68
Australia 09 Luxembourg 69
Austria 0A Japan 00
Barbados 0E Korea 61
Belgium 0F Malaysia 6C
Brazil 16 Mexico 73