Service manual

____________________________________________________________________________Section 6
6-9
stored ECGs will remain in the directory until it becomes full, at this time, the ELI 250/210 will automatically
remove a record, based on its size, in order to make room for the new ECG. Only those records that have been
marked for deletion will be removed. Records are automatically marked for deletion based on the Delete Rule
configuration. To manually mark an ECG record for deletion, press Delete (F4) and an “X” will appear in the far
right hand column of the directory and to remove the delete status, select F4 again.
To transmit one ECG, select F2 (Select) to choose a record from the patient directory.
Use (F1) to navigate down the directory list and Shift (F1) to move up the list. Similarly, use (F2) to page down
and Shift (F2) to page up through the directory. To quickly find and select a patient name, use the keyboard to
enter the first letter(s) of the last name. The letters will be displayed on the lower left corner of the LCD and the
desired name will automatically be highlighted. When the desired record is highlighted, use F3 (Select) to
transmit the individual ECG.