Service manual

ELI 250/210 _________________________________________________________________________
4-14
Carefully guide the printhead assembly out of the writer chassis making sure that no damage occurs to the cables
attached to the printhead.
Remove the 4 screws, item number52, that attach the printhead to the Printhead plastic support.
Note: These screws are coated with Vibratite They are then installed tight and backed off one quarter turn to allow
for expansion and contraction between the printhead and the plastic housing.
Remove the cables attached to the printhead. Please note that on early units the cables are secured to the print head
with adhesive. If the printhead or the cables require replacing the complete assembly should be replaced.
Re-assemble in reverse order.