Service manual

ELI 250/210 _________________________________________________________________________
4-10
When replacing the LCD, remove the old double sided tape and cut a piece of double-sided tape approximately 3
inches. Place this strip of double-sided tape, item number 50, onto mounting surface on Keyboard Bezel as shown.
For the installation of a new LCD, item number 12, cut four pieces of foam tape, item number 51, to approximately
2 inches. Place two strips of foam tape onto LCD as shown. Place the remaining two strips over the first two strips
as shown. Leave the paper backing on the foam tape
Reinstall Keyboard and LCD assembly in reverse order.