Service manual
____________________________________________________________________________Section 3
3-25
12
10 seconds of 12 leads in a 12 channel format
6+6
10 seconds of 12 leads in a 2 page printout (six
channels per page)
Interpretation Option
The ELI 210 automatically analyzes ECGs and prints the optional interpretation on the ECG printout. This option
allows you to select or suppress the “interpretive” text on the ECG report.
NOTE: A qualified physician should review the computer generated ECG interpretation before the
treatment of any patient.
Reasons
The reason statements indicate why a particular interpretive statement was printed. Reason statements print in
[square brackets] within the interpretive text (if the interpretation is turned on). Turning the reason statement
function on or off does not affect the measurements performed or the interpretive statements selected by the analysis
program. See Appendix B for examples of the ECG reason statements on the sample printouts.
For Example:
Anteroseptal Infarct [40+ MS Q WAVE IN V1-V4]
Where “Anteroseptal Infarct” is the interpretive statement.
And “40+ MS Q WAVE IN V1-V4” is the reason statement or explanation as to why the
interpretive statement was printed.
Append to ECG
A status or statement phrase can be appended to the ECG and printed under the interpretive text printout. Either
“unconfirmed” or “reviewed by” can be selected. However, if you wish to have nothing appended to the ECG,
blank may be selected.
Number of Copies
This option defines the number of printed copies when an ECG is taken. A zero (0) setting prints the original only;
one (1) prints the original plus 1 copy; two (2) prints the original plus 2 copies, and so on. Up to 9 copies may be
selected.
Use A4 Paper
The ELI 210 accommodates use of Z-fold thermal paper in either the letter size (8.5 x 11 inches; 216 x 279 mm) or
the “A4” size (8.27 x 11.69 inches; 210 x 297 mm). The provided paper tray spacer is required for use with A4 size
paper. Enable this configuration option and printing on A4 paper is possible. The paper tray spacer should not be
inserted if the letter size paper is used.
NOTE: Paper tray spacer must be inserted for use with A4 size paper.