Service manual

ELI 250/210__________________________________________________________________________
B-2
Xircom Modem Removal
1. Remove the top cover and the writer assembly.
2. Locate the mounting screws, item 48, and bracket, item # 42, for the modem and remove them.
3. Remove the cable, part of item # 55, connected directly to the modem. If needed cut the cable ties, item # 63, that
hold this cable to the chassis of the unit. Note: When replacing the modem remember to replace the cable ties.
This will prevent the cable from coming loose from the modem.
4. Slide the modem card out of the PCMCIA slot.
5. Installation of replacement card is done in reverse order.