Instruction manual

MS 201 T
English
39
Removal
N Pull off the spark plug boot
N Unscrew spark plug (1)
N Turn the clutch until the piston is in
the lower part of the cylinder
N Insert the locking strip (2) through
the opening as far as it will go into
the cylinder
N Fasten the locking strip (2) on the
cylinder fin
N Turn the clutch clockwise until the
piston rests against the locking strip
N Loosen the hexagon of the clutch
counterclockwise (left-handed
thread)
N Unscrew clutch
N Remove chain sprocket (3) and
needle cage (4) from the crankshaft
N Clean crankshaft stub and needle
cage and lubricate with STIHL
lubricant (special accessory)
Assembly
N Fit needle cage and chain sprocket
on the crankshaft
N Screw the clutch counterclockwise
onto the crankshaft
N Tighten the clutch with a torque of
25 Nm
N Remove the locking strip from the
cylinder, screw in and tighten the
spark plug
N Push the spark plug boot onto the
spark plug
1
0011BA031 KN
2
0011BA037 KN
2
0011BA032 KN
144BA017 LÄ
144BA018 LÄ