Instruction manual

MS 201 T
English
23
Preparations
N Before fueling, clean the filler cap
and the area around it to ensure that
no dirt falls into the tank.
Always thoroughly shake the mixture in
the canister before fueling your
machine.
N Position the machine so that the
filler cap is facing up.
Opening
N Raise the grip until it is upright.
N Turn the cap counterclockwise
(about 1/4 turn).
Marks on tank cap and fuel tank must
line up.
N Remove the cap.
Filling up with fuel
Take care not to spill fuel while fueling
and do not overfill the tank.
Closing
Grip must be upright:
N Fit the cap – marks on tank cap and
fuel tank must line up.
N Push the cap into opening until it is
fully seated.
Fueling
In order to reduce the risk of burns
or other personal injury from
escaping gas vapor and fumes,
remove the fuel filler cap carefully
so as to allow any pressure build-
up in the tank to release slowly.
0012BA004 KN
001BA236 KN
001BA232 KN
001BA234 KN
001BA237 KN
001BA234 KN