User manual

XLR 3-pin male and female connector Canon.

Important Note: 2-pole line can not be with each other or in contact with

the metal shell of the connector. Shield to pin 1 must sleeve wrapped.

Menu settings

settings

Using the menu:

1. Boot display the main screen, press the black knob center once, the

main menu appears on the display , enter the main menu setting items ,

the main

Menu set of nine, are: 1. Exit ; 2.dmx address ; 3 . Parameter settings; 4

options; 5 display settings;

Manual control; 7. Test run; 8 Restore factory mode; 9 lamps restore .

2. By rotating black knob confirm the displayed value, or activate the

display function , or to enter the continuous menu . Clockwise menu

The display items incrementing ( auto-repeat ) , or pass on an item in the

menu . Counterclockwise menu display decreasing significantly

Shows ( automatic repeat ) or delivered to the menu on a project . Press

to exit back to the main interface , each setting item has a return value ,

Press Back to return to the previous menu.

a) Quit

b) DMX address :1 -512

c) parameter settings

i. return

ii control mode

1 . Standard mode

2 . Expansion mode

3 Compact Mode

iii. Lamps Model

d) option is set

i. return

ii. X Backward

( 1 ) YES

(2) N O

iii. Y Backward

( 1 ) YES

(2) N O

iv. XY exchange

( 1 ) YES

(2) N O

v bulb control

( 1 ) ON

( 2 ) OFF

vi power-on lamp status

( 1 ) OFF