Specifications

Ver SG 9/200 53 Sharp Electronics Corporation
The Power Supply Cord and plug must be connected to a separate 120 Volt AC, 60 Hz,
15 Amp, or more branch circuit, single grounded receptacle. The receptacle should be
located inside the cabinet directly above the Microwave Oven/Hood Ground ~ mounting
location.
NOTE:
1. If you have any questions about the grounding or electrical instructions, consult a
qualified electrician or serviceperson.
2. Neither Sharp nor the dealer can accept any liability for damage to the oven or
personal injury resulting from failure to observe the correct electrical connection
procedures.