User guide

Features and Menus

Select:

– when you select Auto. Search: If you have subscribed the mobile

unit to multiple communications systems, the mobile unit (when

idle) will automatically select and check itself in to one of the

reachable and subscribed communications systems. Your mobile

unit will thus be automatically checked in to another

communications system as soon as you are out of range of the

current communications system.

– when selecting an existing subscription entry: Use this menu

entry to select a specific communications system. Even if there

are also other existing subscription entries, only the manually

selected entry is used for checking in.

Edit (only when selecting a subscription entry): You can change the name

and call number display of the subscription selected (usually the

internal/local call number of the mobile unit). This information

appears on the display in the idle state when the mobile unit is

checked into a communications system and no priority status

information is displayed.

Entering an internal call number for the mobile unit is irrelevant on

the OpenCom 1000 as the internal call numbers are managed by the

communications system.

GAP only (only when selecting a subscription entry): Activate or deactivate

this mode with the

softkey.

– Not activated (recommended): The mobile unit uses extended

system telephony functions. Use this mode for operation on a

communications system.

– Activated: The mobile unit acts like a standard GAP telephone.

Use this mode when the GAP base station subscription is not

successful.

Delete (only when selecting a subscription entry): This menu entry deletes

the subscription entry on the mobile unit. The mobile unit can only

be operated on this communications system again after re-

subscription.

Telephone Option: This menu contains device settings for the mobile unit.

Language: Select one of the languages listed for the display.

User Name: Enter a name for your mobile unit. This appears when idle. Your

system administrator may already have entered a name. For

information on text entry refer to page 29.