User guide

Features and Menus

Messages: This menu group provides information about short messages and e-

mails that you have received and sent.

Settings: In this menu group you can configure the mobile unit to meet your

personal requirements (e.g. volume, ringer settings, key lock and display

language).

Protection: Among other things, you can activate call protection, restrict dialling

options or change the device PIN.

Special features: This menu is where the communications system's special

features are. The entries in this menu depend on which (additional)

functions have been configured for the system.

Central config. (Central configurations): This is where central settings for the

communications system and other subscribers are configured. This menu is

password protected.

“Calls” Menu

Select Call lists and then select …

In absence: This list is where the internal and/or external call numbers of

subscribers you have called but not reached are listed. A maximum

of 10 entries can be saved in the list. Additional entries delete the

oldest respective entry; the current entry is always in the first line.

Answer: Select an entry. Press the

softkey briefly to receive

information on this call. You can call back the caller directly by

selecting an entry and pressing the

A receiver key. To delete

an entry, press the

C key. An entry is automatically deleted

when you have called the caller back.

Activate: Use this menu entry to switch the list on/off. If the list is

switched off, no calls in absence are saved.

Busy: While telephoning, other calls can be added to your call list.

Use this menu entry to switch this function on or off.

Received calls: You see the internal/external call numbers of the callers

with whom you last spoke. You can edit this list in the same way

(Answer) as the “calls in absence” list (see previous section). Use the

Activate menu entry to switch the list on/off. If the list is switched

off, no answered calls are saved.

Type of call: Use this menu entry to configure whether all calls, only

internal, or only external calls are recorded in the activated call lists.