User guide

Telephoning
58
Confirming Paging Messages
If your communications system is equipped with a corresponding application,
paging messages can be sent to your telephone. Paging messages are shown on
your mobile unit’s display and – depending on the system setting – can also be
signalled with a ringer and/or vibra call alarm (if you have activated the vibra call
alarm, please refer to page 72). The Info key
B continues to flash.
To confirm a received paging message:
If you receive a paging message during a call, you will hear a short signal tone. The
Info key
B continues to flash. You can continue the call. When you have ended the
call, the paging message will be signalled to you once again. Confirm the message
as described.
Note:
Paging messages will be displayed on your mobile unit’s display even if you have
activated call diversion (please refer to page 68).
Calls for ACD Group Members
Members of an ACD group (ACD= Automatic Call Distribution) can be reached
under a common call number. The communications system searches for a tele-
phone within the group that is free upon incoming calls. The “ACD” function is
comparable with the “hunt group” function; it does, however, provide more fea-
tures, such as call statistics and follow-up work times. If you are a member of an
ACD group, you can also receive ACD calls on your mobile unit. The functions
required to do so are available in the Special features menu (see page 77).
B Press Info key briefly.
OK Press softkey to confirm the message.