User guide

Telephoning
47
Loudspeaker: This activates the speaker/handsfree function to allow multiple
persons in the room to participate in the call.
WAP portal: You have access to WAP (WML) pages on the internet using
addresses preset by the system administrator (URLs, Uniform Resource
Locators) and can also enter your own URL.
Ending a Call
End a call as follows:
Accepting Calls
Optical Call Display
When there is an incoming call, the ¢ receiver symbol flashes on the display and
the display illumination is switched on.
Normal Call
Temporarily switching off call signalling
While a call is being signalled on your telephone via ringer and/or vibrator, you can
switch off signalling temporarily. Press the
Silence softkey. You can still accept
the call as described on page 47.
A Press receiver key briefly or
Menu press softkey briefly.
F Use the arrow keys to select the Disconnect menu entry.
A Press the receiver key (your INTERNAL/EXTERNAL key is seized)
or – if multiple call keys have been configured for your telephone –
C Press C key briefly. The key menu opens.
F Use the arrow keys to select the call key desired.