User guide

Functions

Softkey: Arrow Keys

Above the arrow keys you will see symbols that identify the individual functions of

the arrow keys:

Softkey: OK

Use the

softkey to confirm the selected function.

If a function only has one quick-switch option, it is operated by this key. On the

display, active settings (ON) are indicated by a “ ” next to the relevant item;

inactive settings (OFF) are indicated by a “–” or this space in a line is empty.

Softkey: Esc

Press the

Esc

softkey briefly to exit the section of the menu currently displayed.

You will then see the selection from the previous menu branch or the current idle

or call display. When you navigate within the menu and press and hold the

Esc

softkey the menu closes and the telephone returns to the idle state once again.

Softkey: Redial

Allows you to select a call number from the redial list.

The up arrow key allows you to select telephone numbers from the

phone book of your communications system.

The down arrow key allows you to select telephone numbers from

the local phone book of your communications system.

When you are entering call numbers or texts, you can make

changes by moving a cursor. The arrow keys allow you to move the

cursor to the beginning or end of the entry.

If a pick-list (e.g. phone book or menu) is displayed, you can use the

arrow keys to scroll to the desired entry.

If a continuous text is shown (e.g. a message), you can scroll up and

down through the text with the arrow keys.

During a call you can change the volume of the receiver/headset or

of the loudspeaker using the arrow keys.