User guide

Functions
22
Text Lines
The three middle lines of the five-line display shows information on the current
connection state or menu lists and texts.
In the idle state you see the name of the communications system, the internal call
number of the mobile unit, the programmed user name and the current time. Acti-
vated features and a programmed alarm are still shown. In the call state, you see
the call number or the name of the caller/called subscriber on the display.
Pick-lists (e.g. phone book) and the menu for the features are displayed in three
line extracts on the display. Use the arrow keys to scroll up or down. A selectable
entry appears with a dark background.
Text Lines on the Aastra 142d
Softkey Line
The texts and symbols in this line refer to the keys underneath. The contents of the
line change according to the operating status.
Illumination
The display is automatically illuminated when calls are received or when you press
a key. The illumination is automatically switched off again ten seconds after the
last key was pressed.
Softkeys and Other Keys
Both keys below the display as well as the arrow keys are called softkeys. The func-
tions assigned to the keys are shown in the lowest line of the display. The key
function automatically changes depending on the respective operation state of
the mobile unit.
OpenCom 1000
OK Esc
‘
Calls
Call diversions
Messages