Owner`s manual

I6-03923
6/30/10
TRUCKCRAFT CORPORATION
5751 Molly Pitcher Hwy. S.
Chambersburg, Pa. 17201
Phone: [phone] or 717.375.2900
Fax: [phone]
www.truckcraft.com
"
WHERE WORKMANSHIP IS EVERYTHING
"
Preface
Read this manual carefully and follow its recommendations.
This manual contains information for the installation, operation, and maintenance of the
TruckCraft TC-140 D-ICER unit. Proper care and operation of the spreader will assure
years of dependable service. Your local TruckCraft Dealer will instruct you in its general
operation. Please have all operators carefully read this manual thoroughly before using
equipment and keep it for reference. TruckCraft Corporation will be glad to answer any
questions that may arise regarding the operation of your spreader.
Ordering Repair Parts:
When service is necessary, your local TruckCraft dealer can provide the assistance you
need. If you cannot locate a dealer near you, contact TruckCraft Corporation. Always
obtain original TruckCraft replacement parts from your dealer, substitute items could
affect the performance and warranty of the unit.
When ordering parts for the Model TC-140 have unit serial number, ECU serial number and
description, or part number, of parts required. The unit serial number is located on the bottom
right side of the spreader. The ECU serial number is located on the back of the unit in the
upper right hand corner-10 digit number.
Unit Serial Number: ___________________________
ECU Serial Number: ___________________________
Date of Purchase: _____________________________
Purchased From: _____________________________
TruckCraft Telephone #[phone] or 717.375.2900
TruckCraft Fax #[phone]
Method of shipping parts to be specified such as customer pickup, UPS, Common
Carrier, Parcel Post or Air Freight. All orders to be confirmed in writing, or faxed, to
insure proper understanding of request.
Having preventative maintenance parts on hand could save you valuable time.
Improvements and Changes
Because TruckCraft strives to continually improve our products, we reserve the right to
make changes and improvements wherever practical, without obligation to make those
same changes or improvements to the equipment already sold. Photographs used in
this manual may not be up-to-date with current design changes.
2