Operation Manual

EN-20

CHAPTER -7: SWITCHING ON THE MACHINE AND SELECTING A

PROGRAMME

1.) ON/OFF Button

When the Power On/Off button is pressed, the end of programme indicator starts ashing.

2.) Programme Display

The programme display indicates the times of the programmes and the remaining time during the programme

ow. You can also follow-up the selected programmes on this display.

3.) Programme selection button

Using the programme selector button, you can select a suitable programmes for your dishes.

4.) Delay Timer Button

You can delay the start time of a selected programme for 1-2 ….19 hours by pressing the delay timer button

of your machine. When you press the delay timer button, delay “1h” appears on the programme display. If you

continue pressing the delay timer button, 1-2… 19 will be displayed respectively. You can activate the delayed

start by selecting the delay time and the desired washing programme with the programme selection button. It is

also possible to select the programme rst and the delayed start afterwards. If you want to change or cancel the

delayed start time, you can adjust it with the delay timer button; it will be activated according to the last value

entered.

5.) Tablet Detergent Button ( 3 in 1 button )

Press the tablet detergent button when using combined detergents that include salt and rinse aid.

6.) Half load option

By using the ‘half load’ feature of your dishwasher, you can reduce the duration of your selected programmes,

and decrease your power and water consumption by using less electricity and water.

7.)Salt Level Warning indicator

In order to see whether the softening salt level in your machine is sufcient or not, check the salt level warning

light on the display. When salt level warning light comes on, you need to rell in the salt chamber.

Rinse aid Level Warning indicator

In order to check whether there is sufcient rinse aid in your machine, check the rinse aid level warning light on

the display. When rinse aid level warning light comes on,rell the rinse aid chamber.

End of Programme Indicator

The end of programme indicator on the control panel turns on when the selected washing programme is com-

pleted. Your machine also gives a buzzer sound “5 times” when the programme is completed.

1 2 3 4 5