Specifications

SHARP CORPORATION
Sharp SL-series Zaurus “Qtopia” Development Start-up Guide
Ver 1.11, February 28, 2003, 49/63
$ ipkg install qpe-test_0.1-1_arm.ipk
Unpacking qpe-test...Done.
Configuring qpe-test...tar: ./opt/QtPalmtop/bin/qpe-test: input/output
error -- No space left on device
tar: Bad tar header, skipping
tar: Bad tar header, skipping
tar: Error exit delayed from previous errors
rm: /: is a directory
rm: /opt: is a directory
rm: unable to remove `/opt/QtPalmtop': Read-only file system
rm: /opt/QtPalmtop/bin: is a directory
rm: /opt/QtPalmtop/apps: is a directory
rm: /opt/QtPalmtop/apps/Applications: is a directory
rm: /opt/QtPalmtop/pics: is a directory
$
3.3.3. Important notice for “after installation”
The following are some of the important notices for the installation:
A. ipk package remains in the device storage
The ipk package copied to the SL-series Zaurus itself, or memory card remains even if the application is installed.
You may want to delete the installed ipk package(s) when your device storage or memory becomes low in the
free available space, or if you do not need the ipk package.
B. icon(s) for the applications installed on the memory card(s)
You may also install the applications to the CF memory card or SD memory card aside from the SL-series Zaurus
itself. If you install applications on the memory cards, the application icon appears on the Qtopia desktop
(launcher) even if the card is not inserted in the device. Note that you need to insert such memory cards to
execute the application.
C. Re-installing the applications installed on the memory card(s)
You may also install the applications to the CF memory card or SD memory card aside from the SL-series Zaurus
itself. If you install applications on the memory cards, the application is considered to be “already installed” on the
SL-series Zaurus even if the card is not inserted in the device. If you want to re-install such application to the
device itself, or to the different designation, you would first uninstall the application with the memory card inserted,
and then re-install the application.