User Manual

E-13
QT-V5H_SEEG_E3.fm04/6/14
ENGLISH
9HX80432100007
QT-V5H
DVD Operation
- DVD playback -
DVD playback
Turn on the TV, and switch the input to the "VIDEO 1", "VIDEO 2", etc.
accordingly.
" Playback
1 Press the ON/STAND-BY switch on the
main unit to turn the power on.
! The startup screen appears.
! When the disc input mode is not selected, press
the STOP button to display the startup screen.
! If the startup screen does not appear, make sure
the correct video input is selected on the TV .
! If the initial setting screen is blurred, press the NTSC/PAL button repeatedly
whilst holding down the SHIFT button to change the TV type (see page 20).
2 Press the OPEN/CLOSE button to open the disc tray.
3 Place the disc on the disc tray, label side up.
Be sure to place 8 cm discs in the middle of the tray.
4 Press the OPEN/CLOSE button to close the disc tray.
Discs supporting auto start will start to play once you close the disc tray even if
you do not press the PLAY/PAUSE / button.
5 If playback does not start, press the PLAY/PAUSE / button.
DVD
VideoCD
CD
Audio Visual
Entertainment
NO DISC
Disc tray
Label side