Specifications

QT-MP5W

Radio

Setting the FM/AM interval

The International Telecommunication Union (ITU) has established

that member countries should maintain either a 100 kHz or 50 kHz

interval between broadcasting frequencies of FM stations and 10

kHz or 9 kHz for AM stations. The illustration shows the 50/9 kHz

zones (regions 1 and 3), and the 100/10 kHz zone (region 2).

This product is not equipped with a span selector. However, it will be

adjusted to a 50 kHz FM (9 kHz AM) interval when shipped from the

factory.

Before using the unit, be sure to set it to the FM/AM tuning interval

(span) used in your area.

To change the FM/AM tuning interval:

Caution:

 When the unit is left for a few hours after the span has been

switched and the AC power lead disconnected, the FM span will

be automatically returned to 50 kHz (AM span to 9 kHz). If this

happens, set the span again.

 When the span is switched, all the memorised stations will be can-

celled.

1 During Standby mode, press ON/STAND-BY and FOLDER UP

( ) buttons for 2 seconds.

2 The display will appear and the new setting is activated.

kHz kHz

Downloaded from www.Manualslib.com manuals search engine

Downloaded From Disc-Player.com Sharp Manuals