Specifications

7
QT-MP5W
Basic Operation
General control
 To turn the power on
Press the ON/STAND-BY button to turn the power on.
 Auto power off function
In the stop mode of CD operation, the main unit enters the stand-by
mode after 10 minutes of inactivity.
 Volume auto set-in
 If you turn off and on the main unit with the volume set to 16 or
higher, the volume will starts at 16.
 If you turn off and on again with the volume level set to less than
16, it will turn on at the level set.
 Volume control
 Equaliser
When the EQUALIZER button is pressed, the current mode setting
will be displayed. To change to a different mode, press the
EQUALIZER button repeatedly until the desired sound mode ap-
pears.
 Extra Bass (X-BASS)
Press the X-BASS button to emphasise bass sound.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
At STAND-BY mode, red led will lights up.
Press the VOLUME (+ or –) button to
increase or decrease the volume.
MAXIMUM300
.....
FLAT (Not displayed) No equalisation.
ROCK For rock music.
CLASSIC For classical music.
POPS For pop music.
JAZZ For jazz.
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Sharp Manuals