Owner`s manual

Tire and Loading Information label
䊊
1
Seating capacity: The maximum
number of occupants that can be
seated in the vehicle.
䊊
2
Vehicle load limit: See “VEHICLE
LOADING INFORMATION” in the “9.
Technical and consumer informa-
tion” section.
䊊
3
Original size: The size of the tires
originally installed on the vehicle
at the factory.
䊊
4
Cold tire pressure: Inflate the tires
to this pressure when the tires are
cold. Tires are considered COLD
after the vehicle has been parked
for 3 or more hours, or driven less
than 1 mile (1.6 km) at moderate
speeds. The recommended cold
tire inflation is set by the manufac-
turer to provide the best balance of
tire wear, vehicle handling, drive-
ability, tire noise, etc., up to the
vehicle’s GVWR.
䊊
5
Tire size — see “TIRE LABELING”
later in this section.
䊊
6
Spare tire size or compact spare
tire size (if so equipped)
SDI2153
8-30 Maintenance and do-it-yourself
췽 —
—
10/12/09—tbrooks
墍