Owner`s manual

● Push, then quickly release the SET/COAST
switch. Each time you do this, the set speed
will decrease by approximately 1 MPH (1
km/h for Canada).
To resume the preset speed, push and release
the RESUME/ACCELERATE switch. The vehicle
will resume the last set cruising speed when the
vehicle speed is over 25 MPH (40 km/h).
How to change the set distance to
the vehicle ahead
The distance to the vehicle ahead can be se-
lected at any time depending on the traffic
conditions.
Each time the DISTANCE switch
䊊
A
is pushed,
the set distance will change to long, middle,
short and back to long again in that sequence.
SSD0612
5-34 Starting and driving
췽 —
—
10/12/09—tbrooks
墍