Owner`s manual

● If any abnormalities are found or the heated
seat does not operate, turn the switch off
and have the system checked by an INFINITI
retailer.
The front seats are warmed by built-in heaters.
The switches located on the center console can
be operated independently of each other.
1. Start the engine.
2. Turn the control knob
䊊
A
to the right
䊊
1
and select the desired heat range.
● For high heat, turn the knob to the right
䊊
1
.
● For low heat, turn the knob to the left
䊊
2
.
● The indicator light
䊊
B
will illuminate when
the heater is on.
3. To turn off the heater, return the knob to
the OFF position
䊊
3
. Make sure that the
indicator light turns off.
The heater is controlled by a thermistor,
automatically turning the heater on and off.
The indicator light will remain on as long as
the switch is on.
When the vehicle’s interior is warmed, or
before you leave the vehicle, be sure to turn
off the switch.
SSS0911
Instruments and controls 2-39
췽 —
—
10/12/09—tbrooks
墍