User Manual

TO <P=001>
CASSETTE OPERATION
■ Tape playback
1 Set the function switch to TAPE.
2 Load the cassette into the cassette compart-
ment.
3 Press the PLAY button.
4 To advance the tape, press the STOP/EJECT
button, then press the F FWD button. To rewind,
press the STOP/EJECT button, then press the
REWIND button.
ON/STAND-BY
(Function)
To interrupt playback:
Press the PAUSE button during playback.
Press the PAUSE button again to resume playback.
To stop playback:
Press the STOP/EJECT button.
Precautions:
● Be sure not to press the PLAY and REWIND
buttons simultaneously, or the tape will become
damaged.
● Before changing from one tape operation to an-
other, press the STOP/EJECT button.
● Do not press the PAUSE button whilst the fast
forward or rewind operations are in progress.
The F FWD or REWIND button will not be re-
leased when the tape end is reached. Once this
occurs, press the STOP/EJECT button.
RECORDING
● When recording important selections, be sure to
make a preliminary test to ensure that the desired
material is being properly recorded.
● The ALC (Automatic Record Level Control) cir-
cuit automatically controls the level of the input
signal used for recording.
● The VOLUME control may be adjusted with no
effect on the recorded signal. (Variable Sound
Monitor)
● Metal and CrO2 tapes cannot be used for recor-
ding.
ON/STAND-BY
(Function)
PLAY /
PAUSE
TUNING
STOP
■ Recording from the built-in CD player
1 Set the function switch to CD.
● Load the disc to be recorded.
2 Load the cassette into the cassette compart-
ment.
3 Press the RECORD button.
4 Press the PLAY/PAUSE button on the CD.
To stop recording:
Press the STOP/EJECT button.
The tape will stop.
Note:
● If the STOP or PLAY/PAUSE button on the CD
player is pressed whilst recording, or if the CD
comes to its end, the tape deck will not stop.
To record a specific track:
Press the UP or DOWN button on the CD player until
the desired track number is displayed, then start
recording.
QT-CD210H(SUK) TINSE0034SJZZ
5