User Manual

<P=003>
POWER SOURCE
■ AC power
To AC INPUT
AC 230-240 V, 50 Hz
5
4
6
1
3
2
To an AC socket
Connect the AC power lead to the AC power input
socket, then connect the AC power lead plug to an
AC socket.
Notes:
● If the unit will not be used for a long period of
time, remove the AC power lead from the AC
socket.
● Connection of the AC power lead to the unit
disconnects the batteries.
● Never use a power lead other than the one
supplied. Use of a power lead other than the one
supplied may cause an electric shock or fire.
■ Battery power
1 Disconnect the AC power lead, and remove the
battery compartment cover.
2 Insert 6 "D" size batteries (UM/SUM-1, R20,
HP-2 or similar) into the battery compartment.
● When inserting or removing the batteries ③ and
⑥, push them towards the ë battery terminals.
● Installing the batteries incorrectly may cause the
unit to malfunction.
● Batteries are not included.
3 Replace the battery compartment cover.
Precautions for battery use:
● Insert the batteries according to the direction
indicated on the rear panel.
● Replace all old batteries with new ones at the
same time.
● Do not mix old and new batteries.
● Remove the batteries if they are weak or if the
unit will not be used for long periods of time. This
will prevent potential damage due to battery
leakage.
Caution:
● Do not use rechargeable batteries (nickel-cad-
mium battery, etc.).
Battery replacement:
Replace the batteries when they become weak
and/or recording or playback is impaired. This may
occur even though radio broadcasts are audible.
RADIO OPERATION
1 Set the function switch to AM or FM.
2 Use the TUNING control to tune in to the desired
station.
● During FM stereo reception, it automatically
switches to monaural when the signal is weak.
Aerial adjustment
ON/STAND-BY
(Function)
TUNING
FM AM
After use:
Set the ON/STAND-BY switch to STAND-BY.
QT-CD210H(SUK) TINSE0034SJZZ
3