Specifications

E-3
Listening to a CD
MIN
MAX
5 Press the PLAY/PAUSE
0 60 6
0 60 6
0 6 button to start playback from track 1.
6 Turn the VOLUME control to increase or decrease the volume.
7 Press the X-BASS button to emphasise the bass sound.
To interrupt playback:
Press the PLAY/PAUSE 0 6 button during playback.
Press the PLAY/PAUSE 0 6 button again to resume playback.
To stop playback:
Press the STOP ■ button.
To listen to the track being played again:
During playback, press the REVIEW/DOWN 5 button.
To move to the beginning of the next track:
During playback, press the CUE/UP 4 button.
Notes:
● To skip a number of tracks at one time, press the REVIEW/DOWN
5 or CUE/UP 4 button repeatedly until the desired track number
is shown.
● To start playing a desired track, press the REVIEW/DOWN 5 or
CUE/UP 4 button whilst in the stop mode to select the track num-
ber, and then press the PLAY/PAUSE 06 button.
1 Set the FUNCTION switch to CD.
2 Open the CD compartment.
3 Place a compact disc on the spindle, label side up.
8 cm (3") discs may be played without an adaptor.
4 Close the CD compartment.
Precautions:
● When “Cd” or track number is displayed, the power is connected.
If you will not be using the CD player, set the FUNCTION switch to STAND-BY.
● Do not open the CD compartment whilst the disc is rotating.
● If the disc is damaged, dirty, or loaded upside down, the total number of
tracks will not appear.
Clean, replace, or reload the disc properly.
● Keep foreign objects out of the CD compartment.
● Subjecting the unit to shock or vibration may cause mistracking.
● Keep the CD compartment closed except when loading discs.
● Playing certain compact discs at a high volume may cause mistracking.
In this case, listen at a lower volume.
● If TV or radio interference occurs during CD operation, move the unit
away from the TV or radio.
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Sharp Manuals