User Manual

<P=005>
COMPACT DISC OPERATION
■ CD playback
1 Set the function switch to CD.
2 Press the CD EJECT button to open the CD
compartment.
3 Place a compact disc on the spindle, label side
up.
● 8 cm (3") discs may be played without an adap-
tor.
4 Close the CD compartment by firmly pushing the
corner marked "PUSH CLOSE".
Total num-
ber of tracks
Total playing
time
Playing time of
the first track
5 Press the PLAY/REPEAT ( 0 R ) button to start
playback from track 1.
To interrupt playback:
Press the PAUSE BAND ( 6 ) button.
To resume playback:
Press the PLAY/REPEAT ( 0 R ) button.
To stop playback:
Press the STOP (■) button.
6 Rotate the VOLUME control towards right to
increase the volume, and towards left to de-
crease the volume.
7 Set the X-BASS switch to ON to emphasise the
bass region of the frequency spectrum.
Set the X-BASS switch to OFF to cancel the extra
bass mode.
Precautions:
● When "no diSC" or track number is displayed,
the power is connected.
If you will not be using the CD player, set the
ON/STAND-BY switch to STAND-BY.
● Do not open the CD compartment whilst the
disc is rotating.
● If the disc is damaged, dirty, or loaded upside
down, "Er" or "no diSC" will appear in the
display.
Clean, replace, or reload the disc properly.
● Keep foreign objects out of the CD compart-
ment.
● Subjecting the unit to shock or vibration may
cause mistracking.
● Keep the CD compartment closed except
when loading discs.
● Playing certain compact discs at a high vol-
ume may cause mistracking. In this case,
listen at a lower volume.
● The temperature range for playing compact
discs is recommended to be 5˚C (41˚F) - 35˚C
(95˚F).
● If TV or radio interference occurs during CD
operation, move the unit away from the TV or
radio.
■ APSS (Auto Program Search System)
APSS automatically locates the beginning of any
track.
To listen again to the track being played:
Press the 5 button for less than 0.5 seconds
during playback.
To move to the beginning of the next track:
Press the 4 button for less than 0.5 seconds
during playback.
Notes:
● To skip a number of tracks at one time, press the
4 ( 2/4 ) or 5 ( 3/5 ) button repeatedly
until the desired track number is shown.
● To start playback from a desired track, press the
4 ( 2/4 ) or 5 ( 3/5 ) button whilst in the
stop mode to select the track number, and then
press the PLAY/REPEAT ( 0 R ) button.
PUSH CLOSE
POWER
PAUSE
BAND
PLAY/REPEAT /
TUNING
STOP
TUNING
CUE /
PRESET
REVIEW /
PRESET
TUNING
BAND
/
TUNING
/
PRESET
/
PRESET
2
3
4
QT-CD161H(SUK) TINSE0026SJZZ
5