User Manual

<P=004>
POWER SOURCE
■ AC power
● To AC INPUT
● AC 230 - 240 V, 50 Hz
Connect the AC power lead to the AC power input
socket, then connect the AC power lead plug to an
AC socket.
Notes:
● If the unit will not be used for a long period of
time, remove the AC power lead from the AC
socket.
● Connection of the AC power lead to the unit
disconnects the batteries.
● Never use a power lead other than the one
supplied. Use of a power lead other than the one
supplied may cause an electric shock or fire.
■ Battery power
1 Disconnect the AC power lead, and remove the
battery compartment cover.
2 Insert 2 "AA" size batteries (UM/SUM-3, R6,
HP-7 or similar) for tuner memory.
3 Insert 8 "D" size batteries (UM/SUM-1, R20,
HP-2 or similar) into the battery compartment.
● When inserting or removing the batteries ④ and
⑧, push them towards the ë battery terminals.
● Installing the batteries incorrectly may cause the
unit to malfunction.
● Batteries are not included.
4 Replace the battery compartment cover.
Precautions for battery use:
● Insert the batteries according to the direction
indicated on the rear panel.
● Replace all old batteries with new ones at the
same time.
● Do not mix old and new batteries.
● Remove the batteries if they are weak or if the
unit will not be used for long periods of time. This
will prevent potential damage due to battery
leakage.
Caution:
● Do not use rechargeable batteries (nickel-cad-
mium battery, etc.).
● When inserting or replacing the batteries for the
tuner memory for the first time, connect the AC
power cord and set the ON/STAND-BY switch to
ON.
If this operation is not performed, the life of the
tuner memory batteries will be shortened.
Battery replacement:
For the main unit:
Replace the batteries when they become weak
and/or recording or playback is impaired. This may
occur even though radio broadcasts are audible.
For the remote control:
Replace the batteries if the operating distance is
reduced or if the operation becomes erratic.
REMOTE CONTROL
5
7
6
8
1
2
4
3
1
2
● 2 "AA" size batteries
(UM/SUM-3, R6,
HP-7 or similar)
● Batteries are not
included.
15
15
Remote sensor
0.2 m - 6 m
(8" - 20’)
Notes:
● Replace the batteries if the operating distance is
reduced or if the operation becomes erratic.
● Periodically clean the transmitter LED on the
remote control and the sensor on the main unit
with a soft cloth.
● Exposing the sensor on the main unit to strong
light may interfere with operation. Change the
lighting or the direction of the unit.
● Keep the remote control away from moisture,
excessive heat, shock, and vibrations.
QT-CD161H(SUK) TINSE0026SJZZ
4