Operating instructions

<P=003>
(Continued)
PLAY / PAUSE
TUNING
STOP
TUNING
REPEAT
BAND
CUE
PRESET
REVIEW
PRESET
TUNING
/
PRESET
/
PRESET
TUNING
BAND
■ APSS (Auto Program Search System)
APSS automatically locates the beginning of any
track.
To listen again to the track being played:
Press the DOWN ( ) button for less than 0.5
seconds during playback.
To move to the beginning of the next track:
Press the UP ( ) button for less than 0.5
seconds during playback.
Notes:
● To skip a number of tracks at one time, press the
UP ( ) or DOWN ( ) button
repeatedly until the desired track number is
shown.
● To start playing at a desired track, press the UP
( ) or DOWN ( ) button while in
the stop mode to select the track number, and
then press the PLAY/PAUSE ( ) button.
■ Repeat play
During playback, press the REPEAT/BAND ( ) but-
ton repeatedly to select the play mode.
Each time the button is pressed, the display will
change as follows:
Flash 1 track repeat play
Appear
All track repeat play
Disappear
Normal play
Repeat play indicator
Note:
● When using repeat play, be sure to press the
STOP (■) button after you are through listening.
Otherwise, the CD(s) will play continuously.
■ Cue and review
1 Load a disc and begin playback.
2 Hold down the CUE ( ) button for audible
fast forward, and hold down the REVIEW (
) button for audible fast reverse.
3 Normal playback will resume when the REVIEW
( ) or CUE ( ) button is released.
Notes:
● When the end of the disc is reached while
cueing, "End" will appear in the display and CD
operation is paused. Press the REVIEW (
) button for fast reverse or press the STOP
(■) button to stop CD operation.
● If the beginning of the disc is reached while
reviewing, the mode will automatically switch to
normal playback at that point.
QT-CD250(SEC) TINSE0040SJZZ
7