User Manual

<P=005>
(Continued)
■ Recording from the built-in radio
I
1 Set the FUNCTION switch to AM or FM AUTO.
● Tune in to the station to be recorded.
2 Load a blank cassette into the cassette compart-
ment.
3 Press the PAUSE button.
4 Press the RECORD button.
5 Press the PAUSE button again.
■ Erasing a recorded tape
1 Set the FUNCTION switch to TAPE.
2 Load the tape to be erased into the cassette
compartment.
3 Press the RECORD button.
MAINTENANCE
■ Internal care
● Do not touch the Laser pickup lens. If fingerprints
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
● Dirty heads, capstan or pinch roller can cause
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
● After long use, the deck’s heads and capstan
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours of
playing/recording by using a commercial tape
head demagnetiser. Read the demagnetiser’s
instructions carefully before use.
■ External care
● Periodically wipe the cabinet with a soft cloth and
a diluted soap solution, then wipe with a dry cloth.
● Do not use chemically treated cleaning cloths or
other chemicals.
SPECIFICATIONS
SHARP reserves the right to make design and
specification changes for product improvement
without prior notice.
● General
Power source: AC 230 - 240 V, 50 Hz
DC 12 V ["D" size (UM/SUM-1, R20
or HP-2) battery × 8]
Power
consumption: 11 W
Output power: PMPO; 28 W (total)
MPO; 8.4 W (4.2 W + 4.2 W)
(AC operation, DIN 45 324)
RMS; 4.6 W (2.3 W + 2.3 W)
(DC operation, DIN 45 324)
Speakers: 10 cm (4") full-range speaker x 2
Output
terminal:
Headphones; 16-50 ohms
(recommended; 32 ohms)
Dimensions: Width; 480 mm (18-15/16")
Height; 153 mm (6-1/16")
Depth; 254 mm (10")
Weight: 3.2 kg (7.1 lbs.) without batteries
● Radio
Frequency
range:
FM; 87.5 - 108 MHz
AM; 526.5 - 1,606.5 kHz
● Tape recorder
Frequency
response: 50 - 14,000 Hz (Normal tape)
Signal/noise
ratio: 50 dB
Wow and
flutter: 0.3 % (DIN 45 511)
Motor: DC 12 V electric governor
Bias system: AC bias
Erase system: Magnet erase
● Compact disc player
Type: Compact disc
Signal
readout:
Non-contact, 3-beam semi-
conductor laser pickup
Audio
channels: 2
Quantization: 16-bit linear quantization
Filter: 4-times oversampling digital filter
D/A converter: 1-bit D/A converter
Wow and
flutter:
Unmeasurable
(less than 0.001% W. peak)
TINSZ0001SJZZ
B9810.YT
SHARP CORPORATION
QT-CD111H/110H(SEEG) TINSZ0001SJZZ