Specifications

E-3
and/or recording or playback is impaired. This
may occur even though radio broadcasts are au-
dible.
Notes:
● Replace all old batteries with new ones at
the same time.
● Do not mix old and new batteries.
● Remove the batteries if they are weak or if
the unit will not be used for long periods of
time. This will prevent potential damage due
to battery leakage.
● Batteries are not included.
Caution:
Do not use rechargeable batteries (nickel-cad-
mium battery, etc.).
1 Disconnect the AC power lead, and re-
move the battery compartment cover.
2 Insert 10 “D” size batteries (UM/SUM-1,
R20, HP-2 or similar) into the battery
compartment.
● Insert the batteries according to the direc-
tion indicated on the rear panel.
● When inserting or removing the batter-
ies, push them toward the ë battery ter-
minals.
● Installing the batteries incorrectly may
cause the unit to malfunction.
3 Replace the battery compartment cover.
Battery replacement:
Replace the batteries when they become weak
Operation with AC Power
To AC INPUT
Operation with Batteries
9
3
4
5
2
1
6
7
8
10
Check the setting of the AC voltage selec-
tor located on the rear panel before plug-
ging the unit into an AC socket. If neces-
sary, adjust the selector to correspond to
the AC power voltage used in your area.
Selector adjustment:
Slide the selector with a screwdriver to the ap-
propriate voltage number. (AC 110 - 127 V or
AC 220 - 240 V)
Notes:
● If the unit will not be used for a long period
of time, remove the AC power lead from the
AC socket.
● Connection of the AC power lead to the unit
disconnects the batteries.
● Use only the supplied power lead. Using
other power leads may cause an electric
shock or fire.
Wall socket
01-E1-E9-QT-90W(S) 01.9.19, 15:294