Instruction manual
3
3.9.2.1
Measuring Point Temperature tc................................42
3.9.2.2 Ambient Temperature ECG : ta..................................43
3.9.3 Lamp Temperature ...............................................................43
3.9.3.1 Maximum Luminous Flux for T5/∅ 16 mm-Fluorescent
Lamps ........................................................................43
3.9.4 General Recommendations for Installation...........................44
3.9.5 Measuring the Temperature .................................................44
3.10 Luminaire Wiring Test for Two-lamp Luminaires ..................45
3.10.1 Testing with a Test Adapter and Dummy Lamps..................45
3.11 ECG Operation for Luminaires of Protection Classes I and II48
3.12 Insulation Distances in Luminaires .......................................48
3.13 Insulation Test ......................................................................48
3.13.1 Dielectric Resistance in Lighting Systems ............................49
3.13.2 Mesuring the Dielectric Resistance between N and PE or L
and PE..................................................................................49
3.13.3 Three-Phase Operation ........................................................50
3.13.4 Resistance to Overvoltage for QUICKTRONIC for
T5/∅16mm- Fluorescent Lamps...........................................50
3.14 Inrush Current / Automatic Circuit Breakers .........................50
3.15 RCDs / Fault Currents ..........................................................51
3.16 Leakage Current...................................................................51
3.17 ECGs in Three-Phase Operation..........................................51
4. Lamp Wiring.......................................................................................53
4.1 h = 21 mm.............................................................................53
4.1.1 QUICKTRONIC
®
INTELLIGENT 1-lamp version ..................53
4.1.2 QUICKTRONIC
®
INTELLIGENT 2-lamp version .................53
4.1.3 QT-FH MULTIWATT F/CW...................................................53
4.1.4 QT-FQ F/CW 1-lamp version................................................53
4.1.5 QT-FQ F/CW 2-lamp version................................................54
4.2 h= 30 mm..............................................................................54
4.2.1 QT-FH MULTIWATT 1- and 2-lamp version .........................54
4.2.2 QT-FH 3- and 4-lamp version...............................................54
4.2.3 QT-FQ 1-lamp version..........................................................55
4.2.4 QT-FQ 2-lamp version..........................................................55
5. QUICKTRONIC INTELLIGENT...........................................................56
5.1 Definition INTELLIGENT.......................................................56
5.2 Lamp Detection as Fundamental Advantage........................56
5.3 QTi – the High-tech ECG......................................................56
5.4 QTi – Advantages.................................................................56
5.5 QTi – Practically Applied.......................................................57
5.6 Technical Specialties for non-dimmable QTi ........................57
5.6.1 Inrush current limitation ........................................................57
5.6.2 Resistance to Overvoltage up to 400V .................................58
5.6.3 Lamp-ECG-Combination ......................................................58
5.6.3.1 Straight Fluorescent types .........................................58
5.6.3.2 Compact and Circular lamp types..............................59
5.6.4 Wiring ....................................................................................59