Instruction manual

3.1.3.3 WAGO 251 –

horizontal plug

WAGO 251 – horizontal plug

The contact can be released with the help of a small screw driver as

Alternatively the contact can be released by simultaneously twisting and

pulling the cable.

3.1.3.4 WAGO 251 mini – IDC

Release the contact by pulling the cable upwards.

This process can be repeated up to 10 times (depending on the

manufacturer) without damaging the terminal. For further details please

refer to the data sheets of the manufacturers..

3.1.3.5 WAGO 251 mini –

horizontal plug

The contact can be released with the help of a special manual tool as

shown in the picture below. The tool can be ordered from WAGO under the

order number

0206-0830.

Alternatively the contact can be released by simultaneously twisting and

pulling the cable.