Instruction manual

2. Product Features

2.1 Lighting Comfort

• Flicker-free ignition

• Pleasant, flicker-free light with no stroboscopic effects due to high

frequency operation

• High comfort level with no distracting choke hum due to fully

electronic operation (see chapter 2.8 noise)

• No flickering

• No flashing or flickering, electronic defective control for

reliable safety switch-off of defective lamps

End-of-life safety shut down

• Cut-off of the permanent filament preheating after lamp

ignition

• Automatic restart after lamp replacement

2.2 Economy

• High lumen packages for T5 FQ

High Output system

• Very high luminous efficacy for T5 FH

High Efficiency system

• Long lamp life due to lamp start with optimum filament pre-heating

and operation with cut-off technology

• Low maintenance costs due to long lamp life and reduced relamping

intervals

• Lower cooling load of air-conditioning systems due to lower losses

2.3 Safety

All Electronic Control Gear QUICKTRONIC

for operation of T5/∅ 16 mm-

fluorescent lamp systems are developed and designed according to all

relevant national and international industry standards.

Current standard is EN 61347. For Electronic Control Gear for operation of

low pressure gas discharge lamps EN 61347-2-3 applies.

Light engineering with T5 (Ø 16 mm) lamps

012344,5 m

Büro mit 4 1-flammigen Leuchten

Office with 4 single tube luminaires

Leuchte/ 1xL58 W 1xL58 W 1xFH35 W

Luminaire

Vorschaltgerät/ VVG/ EVG/ EVG/

Control Gear LLG ECG ECG

E [lux] 539 518 500

gesamt/total

[W] 260 220 154

% 100 % 85 % 59 %

W/m

15 12 9